Screw Introductions, Im Fishy and heres my mod
Materials needed:
2 NF plunger rods fused together or rebel trooper plunger rod (preferred)
1 NF plunger head
1 medium sized wood screw
13/16 o-ring
A type of vinyl tape or duct tape
Thin wall 3/4 PVC
2 handyman springs
Silicon or your favorite type of Nerf gun lube
A small spring that will be used as catch spring
1 NF catch
1 NF shell (any version will do)
Sandpaper
Pliers
1 3/4 inch coupler and 1/2 coupler OR 3/4 coupler with 1/2 bushing
Whew that’s a lot of stuff
Let’s start now
If you did Bpsos mod (which I find fabulous) and messed up somewhere your in luck
First get the NF shell you raided for the plunger tube
Now get your springs and cut one of them down 2-3 rings put the NF catch onto the plunger rod and put the springs on it the rod as well. Now for the hard part, grab the NF plunger head and the screw and screw it on as tight as possible. If the head spins around this is fine, as long as it doesn’t wobble much. Now wrap with the duct ape around the plunger 1 or 2 times. Put one 13/16 o ring on it. It should look like this:
Congrats you just made the plunger rod assembly; it should look something like this:
But with all that power you need some reinforcement. Grab a metal bar or a cheap metal Allen wrench and glue it in.
Onto the plunger tube
I used 8 and 5/8s of inch of 3/4 thin wall PVC. You want to spray the insides of it will tons of silicon spray, and the o-ring too. Lube it up and glue the plunger tube to one side of the gun. Now grab a spring that you will use as the catch spring. It should be something heavier then the stock catch spring. Now close the gun up.
Now for the barrel assembly you can use either the 3/4 coupler with a 1/2 one hammered in or a 3/4 coupler with a 1/2 bushing. The coupler on however is better for reload time as you don’t have to screw the barrel out. Use whatever barrel you like, the length for the barrel I use is about 5-6 inches with 1 inch of brass nested in the back of it.
I DO NOT HAVE RANGES! But they can compare to my big blast which gets an easy 100 feet.
Questions, comments, flames?
I was inspired by Kbarker as I wanted to make my own NF rifle and came upon making it possible when bpso put out his rebel blaster mod(
found here) I thank bpso for putting that out there so I would buy the gun.