Ok this is my first write up, and its kinda after I already did the mods, but I’ll do my best to make it clear.
I know the Doubleshot has gotten a lot of crap, but I think it’s a pretty cool gun.
Ranges aren’t great out of the box but with some modding I rather like it
I recommend removing the air restrictors in the shells.
Here is how to do that
http://nerfhaven.com/forums/index.php?showtopic=5362&mode=threadedOk first you need to saw off the barrels. A hack saw is the easiest way.
As you can see I decided to cut just in front of this screw, I thought it would be more structurally sound that way.
Before cut
After cut
Then you open it up by removing the screws, don’t bother unscrewing the ones on the barrels you won’t need that part unscrewed.
Here are the internals
Here’s where you can cut the string.
Take out all the pulley stuff, you wont need them anymore
Cut a whole in the back end of the gun so you can put the string through
This is where you’d attach the string(you can use the stock string but mine broke so i added a shoestring instead)
This is how you attach a string to the cocking thing if you want to, or you break the normal string.
Loop the string around (ignore the smiley pencil, it’s the easiest way to demonstrate)
Take the ends through
Tighten and you’re done
Here is a close up of the string coming out of the end
I tied a key ring on the end to make it easier to pull
This is the craft foam I added to cushion the impact when it swings open
And closed
Personally I find this mod makes this gun quite a bit more fun. You can now open it with one hand. Its very Boondock Saints or Desperado esc, of course the fact that it is bright yellow and blue takes away from his, but it’s still cool.
The ranges are decent for a $10 gun and perfect for a indoor war.
I consistently got 40 to 45 feet using cutdown streamline darts
Hope this was helpful
psychoswan